ON THE METHOD OF ORTHOGONALITY CONDITIONS FOR SOLVING THE PROBLEM OF LARGE DEFLECTION OF CIRCULAR PLATE

In this paper,we reexamine the method of successive approximation presented byProf.Chien Wei-zang for solving the problem of large deflection of a circular plate,and findthat the method could be regarded as the method of strained parameters in the singularperturbation theory.In terms of the parameter representing the ratio of the centerdeflection to the thickness of the plate,we make the asymptotic expansions of thedeflection,membrane stress and the parameter of load as in Ref.[1],and then give theorthogonality conditions(i.e.the solvability conditions)for the resulting equations,bywhich the stiffness characteristics of the plate could be determined.It is pointed out thatwith the solutions for the small deflection problem of the circular plate and theorthogonality conditions,we can derive the third order approximate relations between theparameter of load and the center deflection and the first-term approximation of membranestresses at the center and edge of the plate without solving the differential equ     

平板网架结构分析的超级有限元法

本文给出一种二维矩形超级单元，用以分析平板网架结构，其做法是将大型平板网架结构离散成一系列矩形超级单元，考虑弯曲、剪切、挤压、拉压、翘曲等多种非经典变形效应，采用构件自由度向超级元自由度的转换把大型多构件问题的求解变为二维问题的求解，可大大减少未知量，又能保证精度，并可方便地与一般有限元软件连接。     

Effects of oxidation and surface roughness on contact angle

Contact angle is known to be a parameter that effects boiling. This study was undertaken to measure contact angle of high and low surface tension fluids on copper and aluminum surfaces.Data were taken for polished, oxidized, and rough surfaces. A simple, yet fairly accurate method of measuring the static equilibrium contact angle of a solid/liquid interface is presented. The principles of a line light source and tilting plate were modified and then combined in the design of this apparatus. The angles obtained and their variation with the solid surface properties were in good agreement with previously published data. The contact angle of distilled water o of the organic fluids and refrigerants tested were in the range of 2–5°. Roughness and oxidation reduce the contact angle. If the depth of the roughness is less than 0.5 μm contact angle. The apparatus is fairly simple in construction, is inexpensive, and has good reproductibity. The measured angles were then compared to those measured with the sessile drop method.     

偏压电场对压电板中Lamb波相速度的影响

本文研究了偏压电场作用下,Lamb波在压电板中的传播行为，首先给出了偏压电场作用时压电板中的应力场及电位移场，然后通过求解含初应力及初电位移的小幅波动问题的耦合方程，分别给出了Lamb波的对称模态和反对称模态的相速度方程，以典型的PZT－5H压电陶瓷板为例进行了数值计算,并讨论了偏压电场对Lamb波相速度及频散曲线的影响，结果表明，偏压电场可以显著地改变Lamb波的传播速度，借此可使声波器件获得延时效果。     

功能梯度矩形厚板的三维热弹性分析

直接从三维热弹性力学基本方程出发，通过引入两个位移函数和两个应力函数，导出了一个二阶的齐次状态方程和一个四阶的非齐次状态方程。分析中采用了层合近似模型，即将板划分成厚度足够小的若干薄层，从面可将每一层内的材料常数近似为常数。给出了任意厚度的四边简支横观各向同性功能梯度矩形板的热弹性分析，特别当板较薄时，与薄板理论进行了数值对比，发现两者结果吻合很好。最后研究了材料梯度指标对热弹性场的影响，结果显示梯度指标对热应力和位移都有着显著的作用：在不同的区间，梯度指标对它们有不同的影响；并且在同一区间，梯度指标对两者的影响程度也有所不同。     

环形板与扇形板弯曲问题的级数解

由板的基本方程,将位移和荷载沿环向展开为傅里叶级数,可得用傅里叶级数及多项式表示的环形板和直边简支的扇形板的级数解.还用富里叶级数处理沿径向分段连续荷载的问题.     

正交各向异性压磁电弹性矩形板的稳定问题

从压磁电弹性力学的三维平衡方程和本构关系出发,推导得到了正交各向异性压磁电弹性矩形板稳定问题的状态方程。求解状态方程并结合边界条件得到了稳定问题的屈曲方程。给出了临界应力的算例。     

容量矩阵法在涡方法中的应用

本文将容量矩阵技术与快速Fourier变换相结合求解非矩形域的Poisson方程,再与格子涡方法相结合,发展了一套求解复杂外形的快速涡方法。作为算例,计算了有厚度平板和楔形体的分离流动,得到了满意的结果。特别是在垂直平板绕流中,模拟出了由于剪切层不稳定性引起的小涡结构。     

ANALYTICAL EVALUATION OF PERMANENT DEFLECTION OF A THIN CIRCULAR PLATE STRUCK NORMALLY AT ITS CENTER BY A PROJECTILE

The permanent deflection of a thin circular plate struck normally at its center by a projectile is studied by an approximate theoretical analysis,FEM simulation and experiment.The plate made of rate sensitive and strain-hardening material undergoes serious local deformation but is not perforated during the impact.The theoretical analysis is based on an energy approach, in which the Cowper-Symonds equation is used for the consideration of strain rate sensitive effects and the parameters involved are determined with the aid of experimental data.The maximum permanent deflections predicted by the theoretical model are compared with those of FEM sim- ulation and published papers obtained both by theory and experiment,and good agreement is achieved for a wide range of thickness of the plates and initial impact velocities.     

ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented.Based on the expression of magnetic force from the variational principle of ferromagnetic plates,the buckling and bending theory of thin plates,the Mises yield criterion and the increment theory for plastic deformation,we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method.Along with the phenom- ena of buckling/snapping and bending,or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed,the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads,the plastic regions expanding with the magnitude of applied magnetic field,as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.